Bare Copper and Aluminum Conductor
- These are the main metals used as a conductor
- They are used mainly in motors, generators and transformer after insulating with required materials
Rectangular Cross Section
| Properties | Copper Values | Aluminium Values | Unit |
|---|---|---|---|
| Width | 3.00 ≤ W ≤ 30.00 | 3.00 ≤ W ≤ 30.00 | mm |
| Thickness | 1.00 ≤ T ≤ 10.00 | 1.00 ≤ T ≤ 10.00 | mm |
| Cross Section | 200.00 ≤ CS ≤ 3.00 | 200.00 ≤ CS ≤ 3.00 | mm2 |
| Radius | IEC EN60317-4 or customer specification | IEC EN60317-4 or customer specification | mm |
Round Cross Section
| Properties | Copper Values | Aluminium Values | Unit |
|---|---|---|---|
| Diameter | 2.00 ≤ 0 ≤ 10.00 | 2.00 ≤ 0 ≤ 10.00 | mm |
| Cross Section | 3.00 ≤ CS ≤ 100.00 | 3.00 ≤ CS ≤ 100,00 | mm2 |
Conductivity Values
| Properties | Copper Values | Aluminium Values | Unit |
|---|---|---|---|
| Conductor | Cu-ETP,E Cu 58 | Al | |
| Composition | Min.%99.99 CU Max.250 O2 | Min. %99.9 Al | Weight ppm |
| Conductivity | ≥ 58.00 (%100 IASC ) | ≥ 35.00 (%60 IASC) | M/Ωmm2 |
| Tensile trength | 220 ≤ Value ≤260 | 60 ≤ Value ≤ 100 | M/mm2 |
| Elongation | ≥40 | ≥30 | % |
Standards
| Properties | Copper Values | Aluminium Values | Unit |
|---|---|---|---|
| IEC, DIN, TS | DIN 464433, DIN 46452 IEC 851-1..6( for testing) Customer specification | DIN 464433, DIN 46452 IEC 851-1..6( for testing) Customer specification |
