Enamell is applied in high voltage rates and the material reaches to higher BDV levels.
| Properties | Copper Values | Aluminium Values | Unit | |
|---|---|---|---|---|
| Rectangular Cross Section | Width | 3.00 ≤ W ≤ 18.00 | 3.00 ≤ W ≤ 18.00 | mm |
| Thickness | 1.40 ≤ T ≤ 5.00 | 1.40 ≤ T ≤ 5.00 | mm | |
| Cross Section | 3.00 ≤ CS ≤ 200.00 | 3.00 ≤ CS ≤ 200.00 | mm² | |
| Radius | IEC EN60317-4 or customer specification | IEC EN60317-4 or customer specification | mm | |
| Round Cross Section | Diameter | 0.05 ≤ CS ≤ 5.00 | 0.05 ≤ CS ≤ 5.00 | mm |
| Enamel | 3.00 ≤ CS ≤ 100.00 | F or H class | - | |
| Technical Specification | Conductor | Cu-ETP,E Cu 58 | Al | - |
| Composition | Min.%99.99 CU / Max.250 O2 | Min.%99.70 Al | - | |
| Conductivity | ≥ 58.00 (%100 IASC ) | ≥ 35.00 (%60 IASC) | M/Ωmm² | |
| Tensile trength | 220 ≤ Value ≤260 | 60 ≤ Value ≤ 100 | M/mm² | |
| Yield Strength | Min 80 According to customer request |
40 ≤ Value ≤ 60 | M/mm² | |
| Elongation | ≥40 | ≥30 | % | |
| STANDARTS | IEC, DIN, TS | DIN 464433, DIN 46452 IEC 851-1..6 (for testing) Customer specifications | DIN 464433, DIN 46452 IEC 851-1..6 (for testing) Customer specifications | - |
